这个能翻墙的可能已经看过了，我就方便大家，搬过来吧：
Nerf Elite Rampage Internals - Quick Preview!
With the Nerf N-Strike Elite Series rapidly building keen interest amongst the Nerf community, many enthusiasts have also been curious...
How did Nerf improve the spring powered Elite blaster models? Did they retain the reverse plunger system or did they re-design it with another type of plunger system?
Here is your answer!
Yes... Direct Plunger System! （直压系统）
Note that the units i've had a look at might be different from the final production versions. Therefore, this not a full review on them yet, just a preliminary insight into the new internal design.
This photo shows the plunger rod in the primed position (with the spring removed).
Plunger rod, spring and catch removed from the casing. The plunger catch point is situated just behind the plunger head. （锁扣直接开在了活塞头后面）
Here is a view of the plunger system from the back in un-primed position (left side in the photo) and without the plunger rod (right side in the photo). The bolt which pushes back the plunger head and rod during the priming action can be seen at the front of the plunger tube (similar to how a Nerf Longshot works). （气囊剖面图，左边活塞在里面，右边活塞移除，运动方式和LongShot接近……）
Spring plunger design comparison between the Nerf Raider reverse plunger system (top in the photo) versus the Elite direct plunger system (bottom in the photo). （与Raider CS-35 的比较，上面是 Raider，下面是 Rampage ，气缸明显大了…… ）
Spring plunger size comparison between the Nerf Longshot direct plunger system (top in the photo) versus the Elite direct plunger system (bottom in the photo). （与 Longshot 气缸大小的比较，这图看来 Longshot 应该很牛B 啊~！！！）
Kudos to Nerf for listening to their fans and improving the designs on their new blaster models, they have done an excellent job.（官方终于听取了玩家的意见了，改进了设计，干得不错~！）
The new Nerf N-Strike Elite Series is indeed shaping up to become a hot favorite amongst Nerf enthusiasts! :) （精英系列将在Nerf迷中间迅速蹿红~！！！）
Nerf Elite Rampage Internals - Quick Preview!
With the Nerf N-Strike Elite Series rapidly building keen interest amongst the Nerf community, many enthusiasts have also been curious...
How did Nerf improve the spring powered Elite blaster models? Did they retain the reverse plunger system or did they re-design it with another type of plunger system?
Here is your answer!
Yes... Direct Plunger System! （直压系统）
Note that the units i've had a look at might be different from the final production versions. Therefore, this not a full review on them yet, just a preliminary insight into the new internal design.
This photo shows the plunger rod in the primed position (with the spring removed).
Plunger rod, spring and catch removed from the casing. The plunger catch point is situated just behind the plunger head. （锁扣直接开在了活塞头后面）
Here is a view of the plunger system from the back in un-primed position (left side in the photo) and without the plunger rod (right side in the photo). The bolt which pushes back the plunger head and rod during the priming action can be seen at the front of the plunger tube (similar to how a Nerf Longshot works). （气囊剖面图，左边活塞在里面，右边活塞移除，运动方式和LongShot接近……）
Spring plunger design comparison between the Nerf Raider reverse plunger system (top in the photo) versus the Elite direct plunger system (bottom in the photo). （与Raider CS-35 的比较，上面是 Raider，下面是 Rampage ，气缸明显大了…… ）
Spring plunger size comparison between the Nerf Longshot direct plunger system (top in the photo) versus the Elite direct plunger system (bottom in the photo). （与 Longshot 气缸大小的比较，这图看来 Longshot 应该很牛B 啊~！！！）
Kudos to Nerf for listening to their fans and improving the designs on their new blaster models, they have done an excellent job.（官方终于听取了玩家的意见了，改进了设计，干得不错~！）
The new Nerf N-Strike Elite Series is indeed shaping up to become a hot favorite amongst Nerf enthusiasts! :) （精英系列将在Nerf迷中间迅速蹿红~！！！）
