Placing the Unit in Hour Meter Mode
1.
Start with the LifeChoice Activox
POC off.
2.
Press and hold down the Hour
Meter button (approximately two seconds) until the Power LED illuminates. The
Hour Meter LED will remain solid green while the LEDs for Sleep-Low,
Active-High, 1 LPM, 2LPM and 3LPM begin to flash in sequence.
3.
Beginning with Sleep-Low, count
the times each LED flashes and record the value in the boxes below. If necessary, the process can be repeated to
capture the number of flashes for each LED.
Record Readings
The chart below displays
the number of hours associated with each LED.
Record the number of flashes observed for each in the boxes below.