我正在做一个土体和管道的分析，土体本构关系用的是D-P，直接用Command加入。
Solid1~3 是第1层土
mp,ex,1,2.06e8
mp,prxy,1,0.40
mp,dens,1,2600
et,matid,solid45
tb,dp,matid
tbdata,1,137.61e3,30.3,0
Solid4~7 是第2层土
mp,ex,2,2.5e6
mp,prxy,2,0.5
mp,dens,2,1600
et,matid,solid45
tb,dp,matid
tbdata,1,12.5e3,1.5,0
……
计算的时候报错
“One or more unidentified characters have been detected in the command snippet which have been replaced by underscores while writing the CAERep file but those characters are written to the solver input file. Please check the command snippet carefully to avoid any unintended errors.”
但是我在另外一个简单模型中用三层土试算，就没有出现这样的问题。 请各位大牛帮看一下是哪个地方出错了。谢谢了先
Solid1~3 是第1层土
mp,ex,1,2.06e8
mp,prxy,1,0.40
mp,dens,1,2600
et,matid,solid45
tb,dp,matid
tbdata,1,137.61e3,30.3,0
Solid4~7 是第2层土
mp,ex,2,2.5e6
mp,prxy,2,0.5
mp,dens,2,1600
et,matid,solid45
tb,dp,matid
tbdata,1,12.5e3,1.5,0
……
计算的时候报错
“One or more unidentified characters have been detected in the command snippet which have been replaced by underscores while writing the CAERep file but those characters are written to the solver input file. Please check the command snippet carefully to avoid any unintended errors.”
但是我在另外一个简单模型中用三层土试算，就没有出现这样的问题。 请各位大牛帮看一下是哪个地方出错了。谢谢了先
