你好：
你使用的是break in模式哦。根据说明书，break in模式是针对单节的NiMH/NiCD电池的哦。
里面有简单提到：使用这个模式，先是0.2C的电流放电到1.0V，然后0.1C的电流充电，充满16小时，包括6小时的过充呢，随后，存储1-4小时，最后0.2C的电流放电至少5个小时到1V.
• Break_in - Based on norm §7 of IEC 61951-1 Ed. 3.0 2013-10 and IEC 61951-2 Ed. 3.0 2011-05, this mode enables the user to perform the industrial standard procedure to verify the declaredrated capacity of single NiCd or NiMH cells. The norm specifies that first the battery shall bedischarged at -0.2C constant current down to 1.0V cut-off, then charged at 0.1C CC for exactly16h including a 6h overcharge, afterwards stored for 1-4h, and finally discharged for at least 5h at-0.2C CC down to 1.0V cut-off again. This 28h+ long D>C>D procedure shall be repeated up to 5times until the rated capacity has been met, otherwise the battery rating is no good. Similarly, the39h+ long C>D>C procedure can serve as battery forming charge, once every 30 cycles for NiMHbatteries or every half year, recommended both for brand-new batteries and for batteries thatcannot be rescued by the Refresh mode. Because of the timer based charge termination Break_incannot be simulated by the Cycle operation mode. Not available for NiZn nor for rechargeable Libatteries.

愛樂普的AAA鎳氫電池，使用break in模式，时间就是这么长的哦。
你可以参照下说明书。

愛樂普的AAA鎳氫電池，使用break in模式，时间就是这么长的哦。
你可以参照下说明书。
使用这个模式，先是0.2C的电流放电到1.0V，然后0.1C的电流充电，充满16小时，包括6小时的过充呢，随后，存储1-4小时，最后0.2C的电流放电至少5个小时到1V.
用户能设置的就是选择是充放充还是放充放模式。

有没有带软件数据分析的18650充电器