hyd-4K02-B is a multi-function 4K driver board, with 8 lane v-by-one output for Large Size 4K@60HZ panel, it supports VGA,1 HDMI2.0 input, 1 embedded HDMI1.4 input, 1 DVI input,1 Display Port 1.2a input, it also can driver 4K eDP panel with accessory board; 是一款多功能4K显示板卡，可直接驱动8 lane V-by-one 4K 60Hz大尺寸面板，也可支持4/8lane eDP接口 4K 60Hz面板。支持1路HDMI2.0输入（支持4K点对点显示），1路内置HDMI1.4输入，1路DVI输入，1路VGA 输入,1路DP输入；
hyd-4K02-B supports touch UI and IR touch panel intelligent switching for different input source, it used in Commercial display application, such as education white board,medical display, 4K advisement player etc.. 支持端口智能切换，红外触摸框智能切换，以及触控手势菜单操作，支持OPS电脑一键开关机等自动控制。常 用于教育白板，4K监视器，医疗显示器等商用显示；
使用环境和注意事项
⚫ Storage temperature: -10~60°C. ⚫ 存储温度： -10~60°C 。 ⚫ Operation temperature: 0~40°C. ⚫ 工作温度：0~40°C。 ⚫ Operating: 10% to 90% (Non-condensing ，无冷凝) ⚫ 工作湿度：10% ~ 90% ⚫ Store: 5% to 95% ⚫ 储存湿度: 5%~95% ⚫ Operating: 10,000ft (max) ⚫ 工作高度：10,000ft ( 最大) ⚫ Store: 20,000ft (max)
SPECIFICATION Model: 4K02-B
______________________________________________________________________________ ~ 11 ~
⚫ 储存高度：20,000ft ( 最大) ⚫ Vibration ( 振动) 5-55Hz, 19.6m/s²(2G), 20minutes each along X, Y and Z axis. ⚫ Protect the board from static electricity in case of damage to the IC. ⚫ 请使板卡远离静电。 ⚫ Keep the board away from conductor when it is working. ⚫ 请确保板卡工作时远离导体。 ⚫ Don’t push or pull the connectors when the board is working. ⚫ 板卡工作时请勿按压和扭曲。 ⚫ Don’t press, distort or disassemble the board. ⚫ 请勿拆解板卡。 ⚫ Clean the board with soft dry cloth when it’s dirty. ⚫ 如果板卡脏了，请用干布擦拭。 ⚫ Don’t wire in the board to power supply before panel is correctly connected. ⚫ 正确接好驱屏线前请勿接通电源。 ⚫ Inner wires of the whole set should match reasonable, we suggest the LVDS twisted pair wire between the main board and panel must be tied up well and try to use shielding wire. If it’s possible, try to put on the magnetic belt ring on the wire which near the board terminal, each connected wire try to not directly cross the PCB board, especially cross over from the main chips, avoid affecting the whole set EMC performance. ⚫ 机内需合理布线，芯片上方不建议走线，LVDS屏线必须使用双绞线并建议使用屏蔽网，同时将地环锁死在 PCB孔位上。
更多了解请联系 刘经理 电话13265710898
hyd-4K02-B supports touch UI and IR touch panel intelligent switching for different input source, it used in Commercial display application, such as education white board,medical display, 4K advisement player etc.. 支持端口智能切换，红外触摸框智能切换，以及触控手势菜单操作，支持OPS电脑一键开关机等自动控制。常 用于教育白板，4K监视器，医疗显示器等商用显示；
使用环境和注意事项
⚫ Storage temperature: -10~60°C. ⚫ 存储温度： -10~60°C 。 ⚫ Operation temperature: 0~40°C. ⚫ 工作温度：0~40°C。 ⚫ Operating: 10% to 90% (Non-condensing ，无冷凝) ⚫ 工作湿度：10% ~ 90% ⚫ Store: 5% to 95% ⚫ 储存湿度: 5%~95% ⚫ Operating: 10,000ft (max) ⚫ 工作高度：10,000ft ( 最大) ⚫ Store: 20,000ft (max)
SPECIFICATION Model: 4K02-B
______________________________________________________________________________ ~ 11 ~
⚫ 储存高度：20,000ft ( 最大) ⚫ Vibration ( 振动) 5-55Hz, 19.6m/s²(2G), 20minutes each along X, Y and Z axis. ⚫ Protect the board from static electricity in case of damage to the IC. ⚫ 请使板卡远离静电。 ⚫ Keep the board away from conductor when it is working. ⚫ 请确保板卡工作时远离导体。 ⚫ Don’t push or pull the connectors when the board is working. ⚫ 板卡工作时请勿按压和扭曲。 ⚫ Don’t press, distort or disassemble the board. ⚫ 请勿拆解板卡。 ⚫ Clean the board with soft dry cloth when it’s dirty. ⚫ 如果板卡脏了，请用干布擦拭。 ⚫ Don’t wire in the board to power supply before panel is correctly connected. ⚫ 正确接好驱屏线前请勿接通电源。 ⚫ Inner wires of the whole set should match reasonable, we suggest the LVDS twisted pair wire between the main board and panel must be tied up well and try to use shielding wire. If it’s possible, try to put on the magnetic belt ring on the wire which near the board terminal, each connected wire try to not directly cross the PCB board, especially cross over from the main chips, avoid affecting the whole set EMC performance. ⚫ 机内需合理布线，芯片上方不建议走线，LVDS屏线必须使用双绞线并建议使用屏蔽网，同时将地环锁死在 PCB孔位上。
更多了解请联系 刘经理 电话13265710898
