实在是太懒了, 直接更新2016版的新功能吧
首先是支持 Rhino 3dm 格式的文件和CATIA V6 3dxml 格式文件
然后是我最喜欢的改进,就是仿真引擎的升级,仿真速度变成超级快,不用再忍受之前的慢吞吞的速度,(其实大多数时候还是可以忍受的.^_^)

CAD for Machining
Accurate toolpath relies on the accuracy and quality of the underlying model geometry. Since it may not be possible
to use the original CAD system, ESPRIT offers functions to correct minor defects in a CAD model.
New Smooth Surface command and new surface properties
Sometimes surfaces have micro-defects that are not noticeable at a glance. Geometric micro-defects can cause
defects in the machining operations that use those surfaces. A typical example is when a surface is used as a drive
surface for a Composite cycle.
Figure 1. Toolpath analysis shows defects in the toolpath caused by micro-defects in a drive surface.
一个新的功能,用来光顺曲面的.

终于可以直接修改实体上的圆角了, 删除,调整都可以了.

还有好多新的功能就不一一说了, 需要说的是我实在太懒了,哈哈
孔识别中对于穿孔的合并, 捕捉现在也可以对链特征的子元素的端点等进行捕捉了.
更好的配合Machining Cloud使用,3D刀具模型的导入导出等
重头戏在这里 Profit Turning
和ProfitMilling类似的加工方式. 看图吧

改天贴了下一代的软件界面出来

直接导入刀柄模型

Profit Turning 的一些图片